Name:Motor for Door Operator
Model:PM5182025

1. The external rotor structure of the motor has high torque density.

2. The motor adopts enclosed structure and the protection level reaches IP65.

3. Optimizing the electromagnetic design to make the motor have smaller slot torque,stable operation at low speed and high eficiency. 

4. Using high performance permanent magnet material, design overload capacity (≥250%)

5. The military grade electronic components was used in encoder for higher impact resistance.

6. The lead wire adopts silicon rubber high temperature shielded wire, which has good high temperature resistance and anti-interference ability.

7. Class-F Insulation Level, Make Motor Have Higher Life.

8. Compact structure design can further reduce the overall size of door operator.

分享:
    【Back】

    PARAMETER

    ModelPM5182025

    Dimensions(mm)

    140x160x64

    Rated Voltage(V)

    65-100

    Rated Current(A)

    0.6

    Rated Wattage(W)

    43

    Poles

    20

    Rated Torque(N·m)

    2.3

    Rated Speed(rpm)

    180

    Rated Frequency(Hz)

    30

    Working Type

    40%(S3 on 6s off 9s)

    Classification

    IP65

    Insulation Grade

    F

    Encoder Classification

    A/B/C/D/E

    Pulley

    Tooth Outline

    5M

    Tooth Number

    28/19/16

    Width of pulley(mm)

    17/13
    A64
    B53
    C31
    Note:

    1.Installation size:140x120mm

    2.Matching pulley:HTD5M-16,HTD5M-26,HTD8M-22

    3.High efficiency, multi-directional installation, dustproof and oil proof, high temperature resistance, long life, F grade insulation grade, IP65 protection grade

    4.Insulation Resistance≥100MΩ(Cold)

    5.The whole machine pressure resistance 1500V, 1min without flashover, no breakdown

    6.No-load noise value≤48dB

    7.No-load level & vertical vibration≤0.45mm/s


    PM5182022设计图.jpg



    (Exterior Drawing)